Configuring HTTP Settings in the Embedded Web Server

Xerox : Overview, Networking, and Security : Network Connectivity : HTTP : Configuring HTTP Settings in the Embedded Web Server

1. In the Embedded Web Server, click Properties > Connectivity > Setup.

2. In the Protocol area, for HTTP, click Edit.

3. For Connection, select Enabled.

Note:HTTP is enabled by default. If you disable HTTP, then the Embedded Web Server is no longer available.

4. Type a connection port number as needed. The default is 80.

5. To encrypt HTTP communication, for Force Traffic over Secure Connection (HTTPS), select Yes. When Force Traffic over Secure Connection (HTTPS) is enabled, all Web pages contain https:// in the URL.

Note:By default, the device accepts jobs submitted over both HTTP and HTTPS. Force Traffic over Secure Connection (HTTPS) is disabled.

6. Change the HTTPS Port Number as needed. The default is 443.

7. For Keep Alive Timeout, type a time up to 60 seconds. The printer waits the specified amount of time before it terminates the connection.

Note:Increasing the Keep Alive Timeout can cause slower connections.

8. For Choose Device Certificate, select a certificate.

Note:To install more device certificates, refer to Security Certificates.

9. To view the selected certificate details, or save the certificate to your computer, click View/Save.

Note:If you are using the Xerox^® Default Device Certificate, you can install the Device Root Certificate Authority in your Web browser. Installing the Device Root Certificate Authority ensures that your browser trusts the printer.

10. To download the certificate authority, click Download the Device Root Certificate Authority.

11. Click Save.