Fold Adjustment Issues
The Fold Adjustment Profile is available only when the system configuration includes one of the following:
• Production Ready Booklet Maker Finisher for Bi-fold/Single-fold, or
• C/Z Folder device with one of the following optional finishers:
• Production Ready Finisher
• Production Ready Booklet Maker Finisher
• Production Ready Finisher Plus
For detailed information about these finishing devices, refer to the
Finishers.
Problem: Fold Adjustment Issues
The fold on the output is not acceptable.
Suggested Solutions
Create or use an existing Fold Adjustment Profile.
Note:Before creating a new or using an existing profile or performing any alignment adjustments, review the entire Fold Adjustment Profile section in the Manage Stock Library.
For more information, refer to the
Fold Adjustment.
• Depending on your system configuration, the following fold adjustments are available:
• Bi-fold Single Sheet – available only with the Production Ready Booklet Maker Finisher
• Bi-fold Multiple Sheets – available only with the Production Ready Booklet Maker Finisher
• Bi-fold Multiple Sheets Stapled – available only with the Production Ready Booklet Maker Finisher
• C-fold – available with the optional C/Z Folder
• Z-fold – available with the optional C/Z Folder
• Z-fold Half-Sheet – available with the optional C/Z Folder
Create a new or use an existing Fold Adjustment Profile. The following is a summary of the steps required for creating a new or using an existing procedure.
Note:Access this option from > .
1. From the main window, select Profiles.
2. Select the Fold Adjustment tab.
3. Select either the New or Edit button.
If you are editing an existing fold adjustment, select the appropriate profile from the list and then select the Edit button.
4. Type in a new name or edit the existing name.
5. To complete the procedure, refer to > > > . Select the appropriate fold adjustment procedure and complete the procedure for creating a new or editing an existing Fold Adjustment Profile.