Stock Wizard Timeout
After you open the PredictPrint Stock Wizard or open a tray, if you do not scan a stock, after a set time period, the Stock Wizard window closes. The default time period is 1 minute. The Administrator can change the amount of time that the Stock Wizard appears on the screen before it closes.
1. On the Control Center, click Log In, then log in as the Administrator.
2. Click Administration.
3. From the System Settings screen, select the Stock Wizard or PredictPrint Settings tab.
Important:
On Fiery® Print Server version 4.0, FS600, or Press software 6.2.11 and newer version, the Stock Wizard tab is changed to PredictPrint Settings tab. To find your print server version or Fiery System version, on the Fiery Command WorkStation window, go to > > > , then refer to Fiery Server or Fiery System. This information is accessible also on the Fiery configuration page, printed through Fiery® Print Server.
4. For Stock wizard timeout, select a timeout option:
◦ 10 seconds
◦ 20 seconds
◦ 30 seconds
◦ 1 minute
◦ 2 minutes
◦ 5 minutes
5. To save your changes and close the System Settings screen, click OK.
6. To exit the Administrator mode, click User: Administrator, then click Log Out.