Private Stock Sharing
You can create a unique, minimum 4-digit code that all locations in your company can use to share custom stocks and their barcodes.
1. On the Control Center, click Log In, then log in as the Administrator.
2. Click Administration.
3. From the System Settings screen, select the Stock Wizard or PredictPrint Settings tab.
Important:
On Fiery® Print Server version 4.0, FS600, or Press software 6.2.11 and newer version, the Stock Wizard tab is changed to PredictPrint Settings tab. To find your print server version or Fiery System version, on the Fiery Command WorkStation window, go to > > > , then refer to Fiery Server or Fiery System. This information is accessible also on the Fiery configuration page, printed through Fiery® Print Server.
4. To enable or disable private stock sharing, for Private stock sharing, select the On/Off toggle button. If you enabled private stock sharing, type a sharing code that has at least four digits.
5. To save your changes and close the System Settings screen, click OK.
6. To exit the Administrator mode, click User: Administrator, then click Log Out.