Configuring Wireless Settings Manually in the Embedded Web Server
To configure wireless settings manually in the Embedded Web Server:
1. In the Embedded Web Server, click Properties > Connectivity > Setup.
2. For Xerox Wireless Network Interface, click Edit.
3. To configure IPv4, IPv6, and DNS settings, on the Wireless Profile page, for IP, click Edit. The printer uses separate IP settings for wired and wireless network connections. For details, refer to IP. 4. On the Wireless Profile page, for Wireless Settings, click Edit.
5. If your device is connected to a wireless network, on the Wireless Settings page, click Select Different Network.
6. On the Wireless Settings page, click Join Other Network.
7. For Network Name (SSID), type the name of your network.
8. For Security Mode, select the security method that your wireless network uses.
9. Select the required security mode configurations for the wireless network connections.
• For WPA2 Personal or WPA2 Enterprise, the device optionally supports the Protected Management Frames (PMF) and by default, the device is configured with PMF disabled. For details, refer to
Wireless Protected Management Frames.
• For WPA3 Personal or WPA3 Enterprise, the device supports Protected Management Frames and by default, the device is configured with PMF required. For details, refer to
Wireless Protected Management Frames.
10. Configure the following security mode settings, as needed.
• For WEP Settings and Key String Type, select the bit strength and key.
• For Encryption Algorithm, select an encryption method. The Auto option detects the algorithm automatically that your wireless network uses.
• For Authentication Method, select the authentication method that your wireless network uses.
• To require the printer to validate certificates, for Server Validation - Validate server using, select the certificate that you want to use.
Note:To install the validation server root certificate on the
Security Certificates page, click > > > . For details, refer to
Security Certificates.
• For Device Certificate (TLS) - Authentication Certificate, select the device certificate that you want to use.
Note:To install the device certificate on the
Security Certificates page, click > > > . For details, refer to
Security Certificates.
• For Outer Identity, configure the external User ID.
• For User Name, type the user name that the device uses to access the wireless network.
• For Password, type and confirm a password.
• Click Select to save new password, as needed.
11. Click Save.
12. To navigate back to the Setup page, click Properties > Connectivity > Setup.
13. For Xerox Wireless Network Interface, click Make Active.