Maintenance Safety
Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with your printer.
• Clean with a dry lint-free cloth only.
• Use supplies and cleaning materials only as directed.
CAUTION: Do not use aerosol cleaners. Aerosol cleaners can cause explosions or fires when used on electromechanical equipment.• Do not remove the covers or guards that are fastened with screws. Customer service items are not located behind these covers.
• In case of a Dry Ink or Toner Spill, use a broom or a wet cloth to wipe off spilled dry ink/toner. Sweep slowly to minimize generation of dust during clean up. Avoid using a vacuum. If a vacuum must be used, the unit should be designed for combustible dusts, with an explosion rated motor and non-conductive hose.
CAUTION: The metallic surfaces in the fuser area are hot. Use caution when removing paper jams from this area and avoid touching any metallic surfaces.• Do not burn any consumables or routine maintenance items. For information on Xerox® supplies recycling programs, go to www.xerox.com/gwa.