Fold Adjustment Profile

Versant280_Doc : Troubleshooting : Custom Paper Settings Troubleshooting : Custom Paper Settings - Default Settings : Fold Adjustment Profile

Fold Adjustment Profile

Bi-Fold - Single Sheet
Option or Setting	Default Value	Adjustment Step Increments	Available Range	Recommended Incremental Adjustment
Left and Right Sides Equal	N/A	N/A	N/A	N/A
Left Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Right Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output

Bi-Fold – Multiple Sheets Stapled
Option or Setting	Default Value	Adjustment Step Increments	Available Range	Recommended Incremental Adjustment
Left and Right Sides Equal	N/A	N/A	N/A	N/A
Left Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Right Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output

Bi-Fold – Multiple Sheets Stapled
Option or Setting	Default Value	Adjustment Step Increments	Available Range	Recommended Incremental Adjustment
Sheets in Set 1
Left and Right Sides Equal	N/A	N/A	N/A	N/A
Left Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Right Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
On the Fold	N/A	N/A	N/A	N/A
Left of Fold	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Right of Fold	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Sheets in Set 2
Left and Right Sides Equal	N/A	N/A	N/A	N/A
Left Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Right Side of Fold is Longer	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
On the Fold	N/A	N/A	N/A	N/A
Left of Fold	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
Right of Fold	0.0	0.1	0.0 – 20.0 mm	Determined by test print output

C-Fold
Option or Setting	Default Value	Adjustment Step Increments	Available Range	Recommended Incremental Adjustment
“A” Length	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
“B” Length	0.0	0.1	0.0 – 20.0 mm	Determined by test print output

Z-Fold
Option or Setting	Default Value	Adjustment Step Increments	Available Range	Recommended Incremental Adjustment
“A” Length	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
“B” Length	0.0	0.1	0.0 – 20.0 mm	Determined by test print output

Z-Fold Half Sheet
Option or Setting	Default Value	Adjustment Step Increments	Available Range	Recommended Incremental Adjustment
“A” Length	0.0	0.1	0.0 – 20.0 mm	Determined by test print output
“B” Length	0.0	0.1	0.0 – 20.0 mm	Determined by test print output