Starting a Scan Job from a Network Computer
Ensure that the original documents are loaded and that Computer is selected on the Start Scan Job From window.
Note: The following procedure describes the scan method using Windows Fax and Scan with Windows 7.
1. Select Operate from Computer.
The UI displays a standby message stating that a scan job is waiting.
2. To exit the standby mode, select Delete.
The UI displays a Remove Your Original message.
3. Remove your originals and select OK.
4. Reload your originals.
5. From the network computer, select Start > All Programs > Windows Fax and Scan.
6. At the bottom of the left pane, select Scan, then select New Scan from the toolbar.
7. In the New Scan dialog box, select Change, then select the press.
Ensure that the press model name is displayed; it will be shown to the right of Scanner.
If the press model name is not displayed, select Change, then select the press.
8. Select the Profile list, then select Document.
9. Select the desired scan options.
10. Select Scan.
After the documents are scanned, the scanned data is forwarded to the specified computer.
11. The press UI displays a Remove Your Original message.
a. Remove your original documents from the press Document Feeder or Document Glass.
b. Select OK on the press UI.
12. The UI displays a standby message stating that a scan job is waiting.
•Yes: The press cannot start another scan job even though the network computer recognizes the press. Clear the press; go to the next step.
•No: The scan job is completed and the press is ready for other copy/print jobs.
13. From the UI, select Delete.
The scan operation is stopped. The UI displays a Remove Your Original message.
14. Remove your originals and select OK.
The scan job is completed and the press is ready for other copy/print jobs.