Control Panel
The embedded Control Panel on the press includes an LCD touch screen, keypad and feature buttons. The touch screen displays instructions, faults, and informational messages. Select the Control Panel buttons to log in, perform job setup functions, and view job, press, and supply statuses.
Item Number | Name | Description |
|---|---|---|
1 | Home button | Displays the main menu. Provides access to view the supplies and trays available on the press and the status of consumables. |
2 | Tools button | Displays the Tools mode screen. For the operator, select the Tools icon to view billing information and to perform press calibration such as Full Width Array color uniformity adjustments. |
3 | Job Status button | Use to check the progress of active jobs and detailed information about completed jobs or pending jobs. This area also allows you to delete a job (cancel printing) and to pause jobs. |
4 | Machine Status button | Use to check the press configuration, the software version, the press billing meter and counter information, and to access and print job history or error reports. |
5 | Touch Screen | Directly touch the screen to select and set features. Displays instructional and informational messages, fault clearance procedures and general press information. |
6 | Log In / Out button | Use to log in and out of Administrator mode or Authentication mode with user ID and password. |
7 | Language button | Use to select a different language for the touch screen options. |
8 | Power Saver button | Use this button if the press has been inactive and the touch screen is dark (system is in Power Saver mode). This button manually exits the system from Power Saver mode; it does not place the press in Energy Save mode. |
9 | Numeric Keypad | Use to enter alphanumeric characters. The ‘C’ Cancel Entry cancels the previous entry made on the numeric keypad. |
10 | Cancel Entry button | Use this button to cancel the previous entry made on the numeric keypad. |
11 | Clear All button | Use this button to return all selections to the same state as when the press was powered on. Press once to clear a current entry. Press twice to return to default settings. |
12 | Stop button | Press to stop and pause the print job in progress. |
13 | Start button | Press to start and print a selected report. Also used by the Customer Service Engineer during diagnostic routine procedures. |
14 | Press Status Lights | The three indicator lights that identify: data transmission in progress, the press is experiencing an error, and main power is on. |