• Xerox® Iridesse® Production Press User Documentation
• Learning About
  • Safety
    • Notices and Safety
    • Electrical Safety
      • General Guidelines
      • Emergency Power Off
      • Power Cord and Electrical Supply
      • Disconnect Device
    • Laser Safety
      • North America Laser Safety
      • European Union (EU) Laser Safety
    • Operational Safety
      • Ozone Information
    • Maintenance Information
      • Vacuum Cleaner Use for Dry Ink/Toner Spills
    • Consumable Information
    • Battery Safety
    • Product Symbols
    • Environmental, Health, and Safety Contact Information
  • Production Press Overview
    • Print Server
    • Production Press Control Center
      • Function Menu
      • System Menu
      • Alerts and Icons
    • Specialty Dry Inks and Toners
      • Specialty Dry Ink Stations and Printing Order
    • Full Width Array
    • Xerox Remote Services
    • Billing
      • Accessing Billing Information
      • Billing Impression Mode
      • Billing Meters
      • Usage Counter
    • Optional Components
      • Feeders
        • Advanced Oversized High Capacity Feeder
        • Dual Advanced High Capacity Feeder
        • Multi-Sheet Inserter
      • Finishers
        • Offset Catch Tray
        • Interface Decurler Module
        • Inserter Module
        • GBC® AdvancedPunch® Pro
        • High Capacity Stacker
        • Crease and Two-Sided Trimmer
        • C/Z Folder
        • Production Ready Finishers
        • Plockmatic MPS XL (Multi-Purpose Stacker)
        • SquareFold® Trimmer Module
  • System Specifications
    • Production Press Specifications
    • Environmental Specifications
    • Stock Specifications
      • Advanced and Dual Advanced High Capacity Feeders Specifications
      • Dual Advanced Oversized High Capacity Feeder Specifications
      • Finishing Devices
        • Inserter Tray
        • High Capacity Stacker
          • Recommended Stack Heights
          • Hints and Tips
        • Crease and Two-Sided Trimmer
        • C/Z Folder
        • Production Ready Finishers
          • Staple Output Capacity
        • SquareFold® Trimmer Specifications
  • Regulatory Information
    • Basic Regulations
      • FCC Regulations in the USA
      • Canada
      • European Union and European Economic Area Compliance
      • European Union Lot 4 Imaging Equipment Agreement
        • ENERGY STAR
        • Power Consumption and Activation Time
        • Environmental Benefits of Duplex Printing
        • Paper Types
      • Eurasian Economic Union Compliance
      • Turkey RoHS Regulation
      • Ukraine RoHS Compliance
    • Copy Regulations
      • United States
      • Canada
      • Other Countries
    • Safety Certification
    • Safety Data Sheets
  • Recycling and Disposal
    • All Countries
      • Battery Removal
    • North America
    • European Union
      • Disposal Outside of the European Union
    • Other Countries
• Working With
  • Start Up and Shut Down
    • Powering On the Press for the First Time
    • Powering On the Production Press System
      • Power Saver
      • Logging In and Logging Out
      • User Access Levels
    • Restarting the Press
    • Powering Off the Production Press System
      • Powering Off the Press in an Emergency
    • Downloading and Upgrading the Press Software Remotely
  • Stock Library Management
    • PredictPrint Stock Wizard
      • PredictPrint Stock Wizard Overview
      • Scanning a Media Barcode
      • Define a New Stock and Create a Barcode
      • Loading Media with the PredictPrint Stock Wizard
      • Setting Up Media in the PredictPrint Stock Wizard
        • Setting Up Media with a Barcode
        • Setting Up Media without a Barcode
        • Setting Up Media with a Custom Barcode without Internet
      • Advanced Stock Setup
      • Calibration and Profiling
      • Manual Stock Setup
    • PredictPrint Cloud Server
      • Downloading a Stock List
    • PredictPrint Stock Library
      • PredictPrint Stock Library Window
      • Stock Lists
      • Stock Ratings
    • Manage Stock Library
      • Backing Up and Transferring the Stock Library
      • Manage Stock Library
        • Manage Stock Library Window
      • Recommended Media List (RML)
        • Applying a New Stock List
      • Media Management
        • Creating a New Stock From Manage Stock Library
        • Adding a Media Entry
        • Copying a Stock Entry
        • Editing an Existing Stock in the Stock Library
        • Removing a Stock From the Stock Library
      • Tray Properties
        • Tray Stock Mismatch
        • Creating a New Stock From Tray Properties
      • Advanced Stock Setup
        • Tips for Using Advanced Stock Setup Options
        • Applying a Profile to a Stock
        • Creating or Modifying Advanced Stock Setup Options
          • Stock By Name Only
          • Multifeed Detection
          • Fuser Temperature Adjustment
            • Setting a Higher Fuser Temperature
          • Aligner Roll Pressure
          • Transfer Output Adjustment for Trail Edge
          • Second (2nd) Bias Transfer Belt
          • Contact Image Sensor (CIS) Operation
          • Tray Air Assist
          • Enable Tray Heater
          • Alignment File Name
          • Fold Adjustment Profile
          • Productivity Modes
          • Near Empty Detection Level
          • V-TRA Fans
      • Test Print Overview
        • Tips for Using the Test Print Option
        • Using the Test Print Option
          • Test Print Option for 2nd Bias Transfer Roll
      • Correcting the Paper Curl
        • Paper Curl Overview
        • Paper Curl Correction Options
      • Secondary Transfer Voltage Adjustment
        • Using the Auto Adjustment Option for Secondary Transfer Voltage Adjustment
        • Using the Manual Adjustment Option for Secondary Transfer Voltage Adjustment
  • Stock and Feeders
    • Supported Media
      • Paper Types
      • Paper Size Ranges
      • Standard Media Specifications for All Trays
      • Unsupported Media
    • Stock and Media Guidelines
      • Media Selection Guidelines
      • General Media Loading Guidelines
      • Guidelines for Printing on Glossy Media
      • Guidelines for Printing on Hole-Punched Paper
      • Guidelines for Printing on Tab Media
      • Guidelines for Printing on Transparencies
      • Special Print Jobs
        • Installing and Using the Postcard Bracket
      • Matching the Tray and Media Information
    • Using the Multi-Sheet Inserter
      • Loading Media in the Multi-Sheet Inserter
      • Adjusting the Skew on Long Paper
      • Loading Long Paper in the Multi-Sheet Inserter
      • Loading Hole-Punched Media in the Multi-Sheet Inserter
      • Loading Transparencies in the Multi-Sheet Inserter
      • Loading Tab Media in the Multi-Sheet Inserter
      • Loading Postcards in the Multi-Sheet Inserter
      • Using the Xerox® XLS Automatic Feeding Kit
    • Using the Optional Banner Feeder Extension for the Advanced High Capacity Feeder
    • Using the Advanced and Dual Oversized High Capacity Feeders
      • Trays A1-1 and A1-2 Components
      • Feed Performance in Trays A1-1 and A1-2
      • Loading Paper in Trays A1-1 and A1-2
      • Loading Hole-Punched Paper in Trays A1-1 and A1-2
      • Loading Transparencies in Trays A1-1 and A1-2
      • Loading Tab Media in Trays A1-1 and A1-2
      • Loading Postcards in Trays A1-1 and A1-2, and A2-1 and A2-2
    • Using the High Capacity XLS Vacuum Feeder and Dual High Capacity XLS Vacuum Feeder
      • High Capacity XLS Vacuum Feeder (HCVF) Components
      • Dual High Capacity XLS Vacuum Feeder Components
      • Circuit Breaker Switch
      • High Capacity XLS Vacuum Feeder Specifications
      • Paper and Media for High Capacity XLS Vacuum Feeder
        • Loading Paper in the High Capacity XLS Vacuum Feeder (HCVF) Trays
      • Special Media
        • Postcard Setting
      • Loading Paper in the Automatic Extra Long Sheet (XLS) Feeder
        • Loading 488 mm (19.21 in.) or Smaller Paper
        • Loading 488.1–864 mm (19.21–34.0 in.) Paper
        • Loading 864.1 mm (34.02 in.) or Larger Paper
  • EZ-Swap Color Housings
    • Removing the Specialty Dry Ink in Stations 1 or 6
    • Replacing the Specialty Dry Ink in Stations 1 or 6
  • Maintenance
    • Cleaning Procedures
      • Cleaning the Control Center Screen
      • Cleaning the Paper Path
        • Cleaning Paper Path Area 2
        • Cleaning Paper Path Areas 3 and 4
        • Cleaning Paper Path Area 5
        • Cleaning Paper Path Area 6
        • Cleaning Paper Path Area 7
    • Calibrating the Production Press
      • Full Width Array
      • Density Uniformity Adjustment
        • Adjusting Automatic Density Uniformity
      • Automatic Adjustments
        • Setting Up the Automatic Adjustments
      • Automatic Alignment Information
      • Performing an Auto Density Uniformity Adjustment
    • Performing an EZ Press Check
      • Performing an EZ Press Check - Basic Procedure
    • Consumable Supplies
      • Replacing Consumable Supplies
    • Replacing the Dry Ink/Toner Cartridges
    • Dry Ink/Toner Waste Bottle
      • Replacing a Dry Ink/Toner Waste Bottle
    • Replacing a Charge Corotron Assembly
    • Replacing the Fuser Web Assembly
      • Using the Correct Fuser Web Assembly
  • Finishing
    • Interface Decurler Module
      • Interface Decurler Module Components
        • Interface Decurler Module Control Panel
      • Interface Decurler Module Curl Correction
        • Interface Decurler Module Curl Correction Modes and Functions
    • Inserter Module
      • Inserter Components
        • Inserter Control Panel
      • Media for Inserter Tray T1
      • Supported Media for Inserter Tray T1
        • Loading Media in the Inserter Tray
        • Printing on Special Media
      • Managing Inserter Productivity
    • GBC® AdvancedPunch® Pro
    • High Capacity Stacker
      • High Capacity Stacker Media Guidelines
      • High Capacity Stacker Components
        • High Capacity Stacker Circuit Breaker
        • Output Trays
        • Control Buttons
      • Unloading the Stacker Tray and Cart
      • Hints and Tips
    • Crease and Two-Sided Trimmer
      • Crease and Two-Sided Trimmer Configuration
      • Crease and Two-Sided Trimmer Components
      • Crease and Two-Sided Trimmer Maintenance
        • Emptying the Crease and Two-Sided Trimmer Waste Container
      • Crease and Two-Sided Trimmer Module
        • Creaser Media Specifications
        • Crease Buffer Module
        • Crease Fold Types
          • One- and Two-Line Crease – Internal Printing
          • One- and Two-Line Crease – External Printing
          • Three-, Four-, and Five-Line Crease – Internal Printing
          • Three-, Four-, and Five-Line Crease – External Printing
        • Crease Ranges for Crease and Two-Sided Trimmer Module
    • C/Z Folder
      • C/Z Folder Components
        • Trifold Output
    • Production Ready Finisher and Production Ready Booklet Maker Finisher
      • Production Ready Finisher
      • Production Ready Booklet Maker Finisher
        • Finisher Components
          • Finisher Output Trays
            • Top Tray
            • Stacker Tray and Cart
            • Output Trays
            • Booklet Tray
          • Booklet Output Button
        • Bi-Fold Feature for the Production Ready Booklet Maker Finisher
      • Production Ready Finisher Plus
        • Production Ready Finisher Plus Components
      • Finisher Maintenance
        • Finisher Consumable Supplies
        • Checking the Status of Finisher Consumables
        • Replacing the Basic Staple Cartridge for Side Stitching
        • Replacing the Booklet Staple Cartridge for Saddle Stitching
        • Replacing the Finisher Staple Waste Container
        • Emptying the Hole Punch Waste Container
      • Third-Party Finishing Devices
    • Plockmatic MPS XL (Multi-Purpose Stacker)
    • SquareFold® Trimmer
      • SquareFold® Trimmer Components
        • Control Panel
        • SquareFold® Trimmer Circuit Breaker
        • SquareFold® Trimmer Paper Path
      • Square Fold® and Trim Features
        • Square Fold Feature
          • Square Fold Adjustment Settings
        • Trim Feature
          • Trim Options
          • Trim Guidelines
      • Guidelines for Using the SquareFold® Trimmer
        • Full-Page Images on Booklets
        • Booklet Considerations
        • Considerations for Obtaining Appropriate Booklet Output
      • SquareFold® Trimmer Maintenance
        • Emptying the SquareFold®Trimmer Waste Container
    • Using the Optional Tray Extension for Long Paper on Production-Ready Finishers
  • Profiles
    • Profiles Overview
    • Enter and Exit Profiles
    • Alignment
      • Alignment Information
        • Things to Consider When Creating or Using an Alignment Profile
        • Adjustments to the Position of the Output Image
      • Setting the Auto Alignment Profile
      • Alignment Options
        • Before Creating or Using an Alignment Profile
        • Create or Edit an Alignment Profile
    • Fold Adjustment
      • Fold Types
      • Fold Adjustment Profile Option
      • Fold Adjustment Information
      • Create or Edit Bi-Fold Single/Multiple Sheets Adjustment Procedure
      • Create or Edit Bi-Fold Multiple Sheets Stapled Adjustment Procedure
      • Create or Edit C-Fold Adjustment Procedure
      • Create or Edit Z-fold Adjustment Procedure
      • Create or Edit Z-fold Half-Sheet Adjustment Procedure
    • Air Assist
      • Create or Edit an Air Assist Profile
    • Finishing Devices Profiles
  • Job Workflows
    • Using Specialty Dry Inks
      • Selecting Settings for Specialty Dry Inks
      • Using Multi-Pass
      • Adding Metallic Effects with the Image Enhance Visual Editor
      • Setting Spot Color Equivalent Names
    • Booklets with Full Bleed Using Four Optional Finishing Devices
      • Enabling the Offset Mode
      • Printing Saddle-Stitched Booklets With Full Bleed, Trimmed Edges, and Inserting Pre-printed Covers
        • Creating Booklets With Full Bleed
      • Using the Production Ready Finisher, Basic Punch, and C/Z Folder
        • Producing Simple Folded Sheets
      • Using the Inserter to Include Sheets or Tabs into the Printed Output
        • Inserting Sheets and Tabs into the Printed Output
      • Creasing Sheets and Booklets and Stapling
        • Adjusting Booklet Fold and Staple Position
        • Applying a Profile that Adjusts Folds or Staple Position for Booklets
      • Printing Full-Page Images on Booklets
      • Using the GBC®AdvancedPunch® Pro
• Troubleshooting
  • General Troubleshooting
    • Barcode Scanner Faults and Errors
  • Problems With Media
    • Automatic Media Purge
    • Jams
    • Duplicate Barcodes for Media
  • Image Quality Troubleshooting
    • Image Quality Issues
      • White Lines, Streaks, Spots, or Deletions
      • Light Image
      • Unfused Dry Ink/Toner Visible and Rubs Off
      • Mottle
      • Random Spots
      • Repeating Spots or Bands
      • Inboard and Outboard Density Variation
      • Skewed or Crooked Image
      • Image Misregistered or Shifted
      • Gloss Differences within a Page
      • Trail Edge Deletions
      • Banding
      • Streaks
  • Stock Library Troubleshooting
    • Actions
      • Multifeeds, Misfeeds, or Paper Jams in Trays A1-1 — A2-2
      • Paper Curl
      • Paper Jams
      • Uneven Density and Mottle
      • Image Registration, Skew, and Magnification
      • Unfused Dry Ink/Toner on Output
      • Edge Damage
      • Fold Adjustment Issues
  • Tools to Ensure Production Consistency
  • High Capacity XLS Vacuum Feeder (HCVF) Troubleshooting
    • Troubleshooting Misfeeds and Multifeeds in the High Capacity XLS Vacuum Feeder (HCVF)
      • Information about the HCVF Air Assist Blowers
      • Adjusting the Air Assist Profile
      • Troubleshooting Misfeeds in the HCVF
      • Troubleshooting Multifeeds in the HCVF
  • Error Information
    • Module Fault Messages
    • Fault Codes
      • Interface Decurler Module Fault Code Information
      • Inserter Fault Code Information
      • High Capacity Stacker Fault Code Information
      • Crease and Two-Sided Trimmer Fault Code Information
      • C/Z Folder Fault Code Information
      • Finisher Fault Code Information
      • SquareFold® Trimmer Fault Code Information
      • Production Ready Finisher Plus Fault Code Information
        • Finisher Staple Faults
        • Clearing Staple Jams in the Basic Stapler
        • Reinserting the Basic Staple Cartridge
        • Clearing Staple Jams in the Booklet Stapler
        • Stapler Faults in the Production Ready Finisher Plus
• For Administrators
  • Administration
  • Administrator Overview
    • Logging on as Administrator
  • Administration Tab
    • System Settings
      • User Interface Tab Settings
        • Fault Details Window
          • Setting the Fault Details Window Behavior
        • Managing Access to the Stock Library
        • Default Language
        • Changing the Administrator Password
        • Technical Key Operator Password
      • Stock Wizard or PredictPrint Settings Tab
        • Managing Access to the PredictPrint Stock Wizard
        • Guided Stock Setup
        • Custom Stock Name
        • Private Stock Sharing
        • Stock Wizard Timeout
        • Load PredictPrint Database from Device
        • Automatic Image Quality System Check
      • System Tab Options
        • Productivity Modes
          • Selecting the Productivity Mode Options
        • Lower Power Standby
        • Power Saver
          • Setting the Power Saver Options
        • NVM Read/Write
          • Using the NVM Read/Write Feature
        • Stock By Name Only
        • Auto Resume After Fault Clearance
        • Auto Resume After Pause
        • Auto Logoff
        • Attention Sound Settings
        • Date and Time Settings
      • Auto Tray Switching Option
        • Selecting the Tray Feeding Options
      • Output Devices Tab
        • High Capacity Stacker Settings
      • Image Quality Tab
        • Fuser Refresh Mode
      • Full Width Array Tab
  • Maintenance Tab
    • Cleaning the Charge Corotrons
    • Dry Ink/Toner Cleaning

Xerox® Iridesse® Production Press User Documentation

Dry Ink/Toner Cleaning